Help elecam explorer S

[Peppino Junior Member Find all posts View Profile Close Peppino]

Hi guys, i have a problem with this action cam. Yestarday i try to upgrade the FW but now the cam don't work. When I try to turn it on it stays locked in the initial warning screen.
How can i to recovery it?
Thanks and sorry for my bad english.

[petesimon Member Find all posts View Profile Close petesimon]

howdy. please give me a website link to the camera item.

do you have a backup copy of the camera original firmware?

if you do not have a copy of the original firmware, then you will need to find a compatible firmware.
but first, answer my question above and maybe i can help you.

[Peppino Junior Member Find all posts View Profile Close Peppino]

this is the link of the cam :
https://www.elephone.hk/explorer-s#/parameters

i have no a backup copy of the original firmware

[petesimon]

okay. what was the power on / power off boot logo in your camera? first look in this other thread on page 1 in post #8
https://www.goprawn.com/forum/allwin...?p=130#post130

and find a firmware file that has the same or similar on/off boot logo. for example, EIƎ or ELE. and same descriptions if that's available.

there are also more firmware files scattered in that big thread so you can start browsing in reverse from page 38 for example
https://www.goprawn.com/forum/allwin...cameras/page38

read message and watch the tutorial videos in this thread at post #15 to load firmware into your camera
https://www.goprawn.com/forum/allwin...=4908#post4908