Hello team,
I have managed to brick my CAMLINK CL-AC40 camera by flashing a different firmware.
SoC:
Allwinner V3
Product:
weixing179-sdv
Manufacturer:
lzm
Short id:
weixing
OEM id:
camlink
Camera type:
6182
FW orig. date:
20170915
FW mod. date:
20171018
Camera name:
CL-AC40
Version:
20170915V3.3
LCD model:
gc9305
LCD resolution:
320x240
LCD count:
1
Sensor model:
imx179
I have a backup and I also have uploaded it to this website.
I am attempting to unbrick it using Phoenix Suite v1.10 but it does not detect the device.
the computer detects the device and loads the drivers
But the phoenix suite does not detect it an at all ;(
The device is completely dad. only from time to time, when I connect i can see the battery red LED lighting up. and the USB device then appears in device manager
Any help how to try to unbrick it would be helpful.
Also I have created an IMG file from my backup using makeimg
Thank you
Stichas
I have managed to brick my CAMLINK CL-AC40 camera by flashing a different firmware.
SoC:
Allwinner V3
Product:
weixing179-sdv
Manufacturer:
lzm
Short id:
weixing
OEM id:
camlink
Camera type:
6182
FW orig. date:
20170915
FW mod. date:
20171018
Camera name:
CL-AC40
Version:
20170915V3.3
LCD model:
gc9305
LCD resolution:
320x240
LCD count:
1
Sensor model:
imx179
I have a backup and I also have uploaded it to this website.
I am attempting to unbrick it using Phoenix Suite v1.10 but it does not detect the device.
the computer detects the device and loads the drivers
But the phoenix suite does not detect it an at all ;(
The device is completely dad. only from time to time, when I connect i can see the battery red LED lighting up. and the USB device then appears in device manager
Any help how to try to unbrick it would be helpful.
Also I have created an IMG file from my backup using makeimg
Thank you
Stichas
Comment