Announcement

Collapse
No announcement yet.

Allwinner V3/s + IMX179/s, OV4689 and GC2023 action cameras.

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I have to add something wrong with my camera/firmware. 2.7k videos gets chopped at 15 minutes, which is alright, the thing is when the camera shuts down because it has no battery the camera does not close the part that it was recording so you have a ~3GB file that you can not open.
    Another thing: I tried flashing another firmware {this one:Crane (xdv boot logo) 2017-05-02 (shows 20170502V3.3) Ⓧ https://drive.google.com/file/d/0B4t...ew?usp=sharing } that I think it matches everything that my camera has but I got a nice white screen and had to flash back to my original one. Someone can tell me if there is another version that can match my camera? Because I think the one I tried was the only one that has the same wifi and screen. Thanks!

    Comment


    • goitia93
      goitia93 commented
      Editing a comment
      Ok, now I got it. But there is literally only 1 image that have 8 MB and it is actually the same firmware that mine had, so not much to install... The only change with this one is the logo, but I have the same problem, with my 64 gb card the start of the camara takes more time and the sounds that makes brokes a some point (like it lags) and some seconds later it maybe turns on

    • petesimon
      petesimon commented
      Editing a comment
      Wifi driver have to be the same too, right?
      yes

      with my 64 gb card the start of the camara takes more time and the sounds that makes brokes a some point (like it lags) and some seconds later it maybe turns on
      did you test that 64gb card in your computer using a read/write data test program?

    • goitia93
      goitia93 commented
      Editing a comment
      This are the results of doing a test in my tablet (that has a microsd reader) of my 64 card. https://1drv.ms/i/s!AmZwGn4RricOjvtI3UV7aqMLD0MjMQ

  • КАСТОМНАЯ прошивка: https://www.dropbox.com/s/e7vop418qy...p-cam.zip?dl=0

    Comment


    • nutsey
      nutsey commented
      Editing a comment
      Thanx for sharing! Your firmware info:

      Code:
      SoC:  
         Allwinner V3 
      Product:  
         fuxin4k30doublescreenimx179s-sdv
      Manufacturer:  
         lzm
      Short id:  
         fuxin
      OEM id:  
         zhongxing_ir
      Camera type:  
         fx2830
      FW orig. date:  
         20170314
      FW mod. date:  
         20170220
      Camera name:  
      
      Version:  
         20170222 V23
      LCD model:  
         st7789vshxb
      LCD resolution:  
         320x240  
      LCD count:  
         2
      Sensor model:  
         imx179s

    • petesimon
      petesimon commented
      Editing a comment
      also, the FULL_IMG.FEX firmware file is 11.5 MB (12058624 bytes) size

  • Furibee F60 backup: http://www14.zippyshare.com/v/N04o87NZ/file.html
    Product Page: https://www.gearbest.com/action-cameras/pp_699124.html

    GETFWINFO does not show me the information

    Product:
    1 errors occurred.

    Manufacturer:
    1 errors occurred.

    FW date:
    1 errors occurred.

    Camera name:
    1 errors occurred.

    Version:
    1 errors occurred.

    LCD resolution:
    1 errors occurred.
    Last edited by SamWilson98; 10-11-2017, 11:59 AM.

    Comment


    • petesimon
      petesimon commented
      Editing a comment
      thanks for sharing. i got this info...

      FULL_IMG.FEX firmware file is 7.43 MB (7798784 bytes) size.

      Code:
      Product:  
         crane-sl609
      Manufacturer:  
         jiangxiaodong
      FW date:  
         20170831
      Camera name:  
         ( F60 )
      Version:  
         FuriBee
      LCD model:  
         st7789
      LCD resolution:  
         320x240  
      Sensor model:  
         imx179
      Wifi:
         xradio
      Logo:
         FuriBee

  • Hello ! Please help find a new firmware for the Andoer 4K Dual Display Action Cam. (camera as in the picture)

    Comment


    • Help !!! I stitched the wrong firmware and Andoer 4K Dual Display Action Itself switched on the screen saver and hung. I wanted to back it up but I can not, the program PhoenixSuit_V1.10 does not see the connection. What to do ??? Tell me please !!!

      Version firmware: 20170222 V23 LCD model: st7789vshxb LCD resolution: 320x240 LCD count: 2 Sensor model: imx179s
      Last edited by biid; 10-11-2017, 08:53 PM.

      Comment


      • It turned out to restore its firmware (thanks to the author of the video Petesimon Tabibito), but I wanted another PASHROW that would appear in the MENU point of the FOV can help!

        Comment


        • petesimon
          petesimon commented
          Editing a comment
          I don't know what other firmware supports two LCD's (front and rear displays), but you can try these firmware files for the imx179s sensor that are on page 1 in post #8 of this big thread.

          Fuxin st7789 (tec.bean boot logo) 2017-03-09 (shows 20161207V2.3) Ⓧ https://drive.google.com/file/d/0B4t...NBWDFsT0k/view

          Fuxin st7789 (skier boot logo) 2017-05-17 (shows 20170102 V2 3) Ⓧ https://drive.google.com/file/d/0B4t...05anNfTWM/view

          * first change the LCD name inside this next firmware. read post #308 and expand and read the all comments there
          - link - https://www.goprawn.com/forum/allwin...=5243#post5243
          Fuxin GC9305 (skier boot logo) 2017-05-17 (shows C 20170707V23) Ⓧ https://drive.google.com/file/d/0B4t...RydmhHZlE/view

          and here is your original firmware info again:
          Code:
          SoC:  
             Allwinner V3 
          Product:  
             fuxin 4k30doublescreenimx179s-sdv
          Manufacturer:  
             lzm
          Short id:  
             fuxin
          OEM id:  
             zhongxing_ir
          Camera type:  
             fx2830
          FW orig. date:  
             20170314
          FW mod. date:  
             20170220
          Camera name:  
           ?
          Version:  
             20170222 V23
          LCD model:  
             st7789vshxb
          LCD resolution:  
             320x240  
          LCD count:  
             2
          Sensor model:  
             imx179s
          Last edited by petesimon; 10-13-2017, 03:06 PM.

      • Thanks for the answer, I will probyvat THESE firmwares ...

        Comment


        • I stitched all 3 firmware and everywhere PEREVERNUTAYA picture and in the MENU there is no function of the FOV.

          Comment


          • bonjour voici le backup de ma dveetech s2 https://drive.google.com/open?id=0B6...md3QWh1Yk03eFE

            Comment


            • nutsey
              nutsey commented
              Editing a comment
              Merci beaucoup

            • petesimon
              petesimon commented
              Editing a comment
              thank you for sharing. Note - people will need Winrar (unrar) version 5.00 or better to open this .rar file. Maybe 7zip version 17 might work also.
              and here is the info:
              Code:
              SoC:  
                 Allwinner V3 
              Product:  
                 craneimx179-sdv
              Manufacturer:  
                 yj
              Short id:  
                 zhongxing
              OEM id:  
                 zhongxing
              Camera type:  
                 lt609
              FW orig. date:  
                 20170707
              FW mod. date:  
                 20170718
              Camera name:  
                 ?
              Version:  
                 20170718V3.3
              LCD model:  
                 st7789v
              LCD resolution:  
                 320x240  
              LCD count:  
                 1
              Sensor model:  
                 imx179
              Wifi:
                 xradio
              Logo:
                 DveeTech
              Logo:
          Working...
          X