Announcement

Collapse
No announcement yet.

Samples Thread: Post yours.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Samples Thread: Post yours.

    So I put up some more samples: https://www.mediafire.com/folder/o5ncedg5ut39l/Samples

    They are stream cut for the most part. I've seen a few go up all over the place and thought why not have them in one spot.



  • #2
    Looks great, so I assume it's Q3H, which lens is that, stock one? Also what exactly was modded in this firmware if anything?
    Last edited by Tubenstein; 10-08-2016, 08:35 PM.

    Comment


    • #3
      Its q3h/imx179A. The module was modded to remove the post processing, gop was shortened and the bitrate was raised. Lens is the $10 gopro2 lens on ebay. Its IR filter gives a red tinge sometimes and has more sun flares.

      Comment


      • #4
        My F60B. Stock everything. It's Huangle Crane SL603 with surfer boot logo. Shows 'V3' model and "20160515V4.0" at firmware info.
        samples - https://www.dropbox.com/sh/kej1utqb7...nEHJp5Pja?dl=0 ( or short link https://goo.gl/qxomfR )

        *EDIT -- more samples in my yandex cloud storage
        https://yadi.sk/d/djAT7SJpyS84R

        and even more in my other dropbox
        https://www.dropbox.com/sh/ow2b0q6nt...DznAgTUva?dl=0

        Notice: some samples were made using an Andoer camera and different fuxin firmware 20160812V2.3 or 20161019V2.3
        Last edited by petesimon; 04-14-2017, 11:35 AM.

        Comment


        • nutsey
          nutsey commented
          Editing a comment
          Very nice farm ))

        • petesimon
          petesimon commented
          Editing a comment
          Thanks nutsey! ) But the farm could sound better if the 8000 khz sample rate was better. Has you, thegamut or somebody improved this? Thanks for you work.

        • nutsey
          nutsey commented
          Editing a comment
          Guys from Russian forum managed to fix this. Here are the patched lib files: https://www.goprawn.com/forum/allwin...?p=772#post772

        • petesimon
          petesimon commented
          Editing a comment
          nutsey Thanks. I guess i have to use imgRepacker and/or Uberizer ( http://forum.xda-developers.com/show....php?t=2124367 ) to unpack my firmware fex/img files, copy the new lib (.so) files into the rootfs (?) and use those programs again to repack...and then flash it to the cam. Right?
          I wish there was a step by step guide for the whole or most of the procedure made as a sticky post in this forum or in dashcamtalk (unless I've missed it already).
          Last edited by petesimon; 10-22-2016, 12:38 AM.

        • thegamut
          thegamut commented
          Editing a comment
          if you are editing your own image the script.bin is already there, you can leave it as binary so no uberizer. depending on your firmware, you may want to re-patch your own libCedarX.so. putting rootfs on SD is recommended unless you want to keep flashing for every little hack.

      • #5
        referring to this past post (and see comments there) https://www.goprawn.com/forum/allwin...=1112#post1112
        hm maybe I should post here too these funny raw video samples of how modded firmware can create some "colorful" results .
        folder - https://www.dropbox.com/sh/uomiog0q5...a25PzE2ta?dl=0
        cheers.
        Attached Files

        Comment

        Working...
        X