Announcement

Collapse
No announcement yet.

Black Screen - Bitmore CAM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Black Screen - Bitmore CAM

    Hi everyone,

    I have a problem with the BITMORE 4K camera clone.


    The camera does not display the image (no backlight?). I swapped for a good display and still no picture.
    The camcorder records, wifi working, I display the picture after HDMI on TV.

    Hardware:
    IMX179 + ALLWINNER V3 + XR819

    Firmware:
    Name: V3
    Version: 1.2.900
    Update: 20170901

    Backup:
    https://www.dropbox.com/s/klof1yvj73...ackup.zip?dl=0

    Product:
    1 errors occurred.
    Manufacturer:
    1 errors occurred.
    FW date:
    1 errors occurred.
    Camera name:
    1 errors occurred.
    Version:
    1 errors occurred.
    LCD model:
    st7789v
    LCD resolution:
    1 errors occurred.
    Sensor model:
    imx179


  • #2
    woh. i like the air vent thingy above the "bitmore" logo on front of the camera body. also, the motherboard looks very neat in the 4th photo.

    be to use 20170424 scripts in comment #30.14 in this post https://www.goprawn.com/forum/allwin...?p=839#post839

    your FW info:
    Code:
    SoC:  
       Allwinner V3 
    Product:  
       crane-sdv
    Manufacturer:  
       zrj
    FW date:  
       20171103
    Camera name:  
       V3
    Version:  
       1.2.900
    LCD model:  
       st7789v
    LCD resolution:  
       320x240  
    Sensor model:  
       imx179
    Wifi:
       xradio
    Logo:
       bitmore (listen connect share)
    .
    Click image for larger version

Name:	off-logo.jpg
Views:	181
Size:	10.6 KB
ID:	9834

    Comment


    • petesimon
      petesimon commented
      Editing a comment
      hin - try other 'Crane' firmware files that have the same imx179 sensor but different LCD driver name (so not st7789v)

    • hin
      hin commented
      Editing a comment
      after flashing camera die...
      not started only blinked red diode after connected to PC

      Crane (xdv boot logo) 2017-05-02 (shows 20170502V3.3) Ⓧ: https://drive.google.com/file/d/0B4t...ew?usp=sharing

    • petesimon
      petesimon commented
      Editing a comment
      after flashing camera die... not started only blinked red diode after connected to PC. Crane (xdv boot logo) 2017-05-02 (shows 20170502V3.3) Ⓧ
      Maybe you must try many 'Crane' firmware files to find one or two that will work

      watch this video tutorial from TIME 13:50 to flash-load firmware https://youtu.be/QrTxFjIiHvc?t=830

  • #3
    Not working

    no reaction to connect the camera to the PC. Once the upper diode flashes (with the shutter), the red diode and the end will turn on later.

    Help..

    Comment


    • petesimon
      petesimon commented
      Editing a comment
      i have many times bricked and recovered several of my Allwinner V3 cameras by doing the steps as shown in the video at TIME 13:50 https://youtu.be/QrTxFjIiHvc?t=830 . * be sure to download all drivers and tools first, and remove battery, remove sd card, power off camera, DISconnect usb cable, and then press / hold UP arrow button on camera and connect usb cable to camera and to computer.... and follow the steps in the video.
Working...
X