Announcement

Collapse
No announcement yet.

Change web server on Camera

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Change web server on Camera

    Hi, I'm new to the forum, really of topic too.
    I recently bought a camera (see in picture), i think it has a more powerful hardware, than other trucks find on internet. I need camera for control my enviroment, I like it for the little sensor: it is separated from electric board, and it can be placed everywere. Normal ip-cam are much bigger.
    Now, the problem is the program for use the camera does not work. Its name is MateCam, for Android.
    My goal is to install in this board a new firmware/web server, that let me access on wireless, with a app for Android.
    Am I in the right place?
    Reading some post in this forum, I realized that: I need a program (for a windows pc, usb) to load a new firmware, then I need a firmware for this specific hardware, it seems there are several types. I will need instructions on how to use the settings. I need an app that controls the firmware wirelessy.
    Has anyone already had these needs?

  • #2
    Is this a MateCam X7? Any firmware files for it?
    Last edited by nutsey; 03-27-2020, 07:04 AM.
    Donate here if you want to support my efforts and this site.

    Email me if you have any offers, requests or ideas.

    Comment


    • #3
      I looked for version, it seems matecam_x1. Maybe we need to compare the image of the board with that of the matecam_x1 to be sure.

      Comment


      • #4
        Could you show both sides of the PCB in high res? You can upload the pics here: https://imgbb.com/
        Donate here if you want to support my efforts and this site.

        Email me if you have any offers, requests or ideas.

        Comment


        • #5
          https://ibb.co/ssLF9Yp
          ​​​​​​https://ibb.co/WKs8rJF
          https://ibb.co/b38VFYt​​​​​​
          ​​​​​​https://ibb.co/JrhZV3b

          Comment


          • nutsey
            nutsey commented
            Editing a comment
            First of all you need to save your stock firmware. It can be done using an SPI-programming device like CH341A USB dongle with a SOI8 test clip.

        • #6
          Ok, I've bought the programmer, I have read flash and save dump file on my pc.
          Next step?

          https://ibb.co/RcxyFRb

          Comment


        • #7
          I've tried to upload dump file but the message of goprawn is:

          Dump_file
          Upload failed. You are not allowed to upload files with the extension Dump_file.

          but it has not extension... what happen?
          It is about 8Mb
          Can I send you by another way?

          Comment


          • nutsey
            nutsey commented
            Editing a comment
            This site has strict monthly traffic limits so it's not good for filesharing. Could you send it to my email - [email protected] ?

        • #8
          Let me know if file send is regular and correct.
          Now I have to replace firmware with another modified. Where I can download it?
          Exist any specific sites or servers that allow this?
          Thank you

          Comment

        Working...
        X