Hi guys, I received My Elecam Elite today, but noticed that the stabilization wasn't working very well and with a little search found that there was an update. So I did it, and the camera bricked. What happened: camera flashes the firmware (blue light blinking and then only red kept on), i removed the USB cable and the micro SD, put in the battery, and the camera didn't started. It makes the boot sound and the click sounds, but no LCD and no LEDs working. Tried to flash other firmwares through tutorials found here, but the camera only lights up the red LED while on USB, no Blue LED and waiting does not result in flashing the firmware. There's a way to save this camera? It only worked for a few minutes 😞
Announcement
Collapse
No announcement yet.
Elephone Explorer Elite
Collapse
X
-
please check these other threads and posts about the Elite cam before trying to recover your cam.
https://www.goprawn.com/forum/novate...about-firmware
https://www.goprawn.com/forum/novate...e-20170208v1-0
https://www.goprawn.com/forum/novate...?p=433#post433
http://bbs.elephone.hk/forum.php?mod...1#.WaSxuYh9600
-
Hello guys I have contacted elphone ingineers and they send me this link to al firmware lets try them https://mega.nz/#F!U0QnmIxI!MuaR0PddfjF9Odr83yeUKg
- 2 likes
Comment
-
here's the data on my pcloud storage, but i added Explorer_Dual_20171017_V3_4KSPORTS-bin.zip firmware,
from https://www.goprawn.com/forum/novate...=7499#post7499
download - http://pc.cd/rXL7
Comment