Announcement

Collapse
No announcement yet.

Eken H9 (SPCA6350) teardown.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Eken H9 (SPCA6350) teardown.

    1. Front cover removed, inner plastic frame (seems like this part is unified with G2/H2 Eken cams) front and back:
    Plastic frame (back). H9 cam with front panel off. Plastic frame (front).
    3 Photos
    Donate here if you want to support my efforts and this site. Other options for gratefulness are also available on request.

    Email me if you have any offers, requests or ideas.
    Tags: action camera, disassembly, eken h9, sunplus, teardown
    • 1 like
  • #2
    2. Main PCB (it's same for both H9 and H9R models):
    PCB manufacturer logo. Main PCB marking. PCB back. PCB front.
    4 Photos
    Donate here if you want to support my efforts and this site. Other options for gratefulness are also available on request.

    Email me if you have any offers, requests or ideas.
    • 1 like

    Comment

    • #3
      3. iCatch (Sunplus) V35 SPCA6350 SoC, Winbond 25Q64CV 3v 64Mbit (8Mbyte) serial flash IC - WSON 6x5mm config and a battery controller chip:
      SoC Flash IC Charging and power management IC.
      3 Photos
      Donate here if you want to support my efforts and this site. Other options for gratefulness are also available on request.

      Email me if you have any offers, requests or ideas.
      • 1 like

      Comment

      • #4
        4. 10mm speaker, 4mm mic and a pretty strange looking wi-fi antenna:
        Speaker (10mm). Wireless antenna. Microphone (4mm).
        3 Photos
        Donate here if you want to support my efforts and this site. Other options for gratefulness are also available on request.

        Email me if you have any offers, requests or ideas.
        • 1 like

        Comment

        • #5
          5. Shutter key PCB, power key PCB (PCBs from outdated Eken W8 action cam are used) and sensor module ribbon cable:
          Power/mode key PCB. OV4689 sensor module ribbon cable marking. Shutter/OK key PCB.
          3 Photos
          Donate here if you want to support my efforts and this site. Other options for gratefulness are also available on request.

          Email me if you have any offers, requests or ideas.
          • 1 like

          Comment

          • #6
            6. LCD ribbon cable:
            LCD ribbon cable marking.
            1 Photo
            Donate here if you want to support my efforts and this site. Other options for gratefulness are also available on request.

            Email me if you have any offers, requests or ideas.
            • 1 like

            Comment

            • #7
              Nicely done! Here are some more teardown and LCD replacement info/pictures from the "Eken H9 User Group" on Facebook.

              teardown - https://mobile.facebook.com/groups/7...70781319716182

              LCD replacement - https://mobile.facebook.com/groups/7...79219742205673
              2 Photos
              • 1 like

              Comment

              Previous template Next
              Working...
              X