Announcement

Collapse
No announcement yet.

What firmware for this camera please?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What firmware for this camera please?

    Hello everyone,
    new to the site,sorry if posting in wrong place,have tried to find firmware for this type of camera,with no results.
    Could anyone please identify which firmware is needed.

    What would be the easiest way to put firmware from one camera onto one of the same type,

    other than using a back up,which I have not got ?


    Thanks for any help

  • #2
    It looks like an Eken H9 OEM clone. Do not try flashing anything without getting the backup first.
    Donate here if you want to support my efforts and this site.

    Email me if you have any offers, requests or ideas.

    Comment


    • #3
      Thanks for your reply.

      Comment


      • petesimon
        petesimon commented
        Editing a comment
        the camera could use any possible chip-set such as an Allwinner V3, or SPCA6350 or another chip-set. please research now, get a firmware backup first and do not load any firmware into the camera until you're really sure about the camera.

      • techy
        techy commented
        Editing a comment
        Now it is identified as h9 clone what firmware would be compatible ,other than getting same camera and putting that firmware on? Thanks for your time and help.

    • #4
      Just read your message,so sorry for late response.
      Shall open camera up and try to identify chip-set,I know its a cheap camera but wanted to try and un brick it(white screen ).

      other camera is a Eken H9R .
      Which is the easiest way to get a back up of cameras firmware please, FRM or Phoenix suite ??
      Thanks to all help received .

      Comment


      • #5
        w i n b o n d ?

        Comment


        • nutsey
          nutsey commented
          Editing a comment
          8 legs SOP8 case?

      • #6
        8 legs ,what is sop8 case please?

        Comment


        • #7
          w i n b o n d 250128FVTM with 8 legs

          Comment


          • nutsey
            nutsey commented
            Editing a comment
            That's your cam's flash memory chip.

        • #8
          Will this help find firmware type?
          Thank you for your help.

          Comment


          • nutsey
            nutsey commented
            Editing a comment
            Not really. More important parts are on the other side of the PCB.

        • #9
          o k thanks

          Comment


          • #10
            will this help identify the camera?

            Comment


            • nutsey
              nutsey commented
              Editing a comment
              The main chip is under that black square heat spreading sticker.

          • #11
            Just would like to put some firmware on the camera, but no back up saved .
            Attached Files

            Comment


            • nutsey
              nutsey commented
              Editing a comment
              Please do not do it without having your backup first.

          • #12
            Thanks for your help today

            Comment


            • #13
              SPC A6350MHHM21

              VMP 3BB64.OO
              1537 Is all the details that I can find sorry

              Comment


              • nutsey
                nutsey commented
                Editing a comment
                Told you it was an H9 cam clone.

            • #14
              what firmware to use on it,buy the same type of camera and put that firmware /back up on to it?

              Comment


              • nutsey
                nutsey commented
                Editing a comment
                Use your stock firmware. You don't get anything useful by flashing 3rd party firmwares.

            • #15
              Thanks for your time and help today ,shall get same camera and put that on ,ave throwing it in the bin.

              Comment

              Working...
              X