Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Хуже по картинке точно не будет.
-
Привет. Да, должно подойти отсюда: https://www.goprawn.com/forum/ambare...ustom-firmware
-
Hi,
Thanks for sharing your review!
-
I believe 0xFF tailing bytes in the end of .jffs2 files shoud be removed.
-
I suppose that secure shell (SSH) or telnet would be more convenient to use.
-
Thanks for sharing! Your 20191207 fw is based on a newer SDK comparing to 20190928 I shared above. There were many thing added: 4 video shooting modes,...
-
Sure.
-
You can read the flash dump directly with an SPI programmer and split it into separate files. Then you will get access to the filesystem (jffs2), u-boot.bin...
-
Sigmastar dashcam chips roadmap. SSC862X and SSC8668G shown as capable of H.265 4K30....
Leave a comment:
-
-
Seems like the shell prompt is disabled in your case. Maybe you can find something useful here: http://marcusjenkins.com/hacking-cheap-ebay-ip-camera...
-
It should do the job and I have a couple of those cheap CH341A dongles, but I prefer this: https://www.amazon.com/Flashcat-Memo...ammer-EEPROM-s...Last edited by nutsey; 1 week ago.
-
This little eight-legged guy: https://www.winbond.com/resource-fil..._g_feb1714.pdf
Or you can try finding RX/TX pcb testpoints...
-
Here you are: https://www.dropbox.com/s/t8i81uqmdh...90928.zip?dl=1
I recommend to save your stock fw backup with a flash memory...
-
I guess there are two hardware revisions of this cam: I've found 3.0.0.10.20190108 (X2-dv-3556A-imx377-ap6255) and 11.8.3.2.20190928 (XTUX2-dv-3556A-imx377-rtl8189)...
No activity results to display
Show More
Leave a comment: